First of a lll we have to now some basic things about the material required to produce a circuit, so in the first post this is what i´m going to explain.
To make a circuit in a practical way we require some basic things such as:
STRIPBOARD
Stripboard is a widely-used type of electronic prototyping board characterized of regular (rectangular) grid of holes, with wide parallel strips of copper cladding running in one direction all the way across one side of the board. In using the board, breaks are made in the tracks, usually around holes, to divide the strips into multiple electrical nodes. With care, it is possible to break between holes to allow for components that have two pin rows only one position apart such as twin row.
RESISTOR
A resistor is a passive two terminal electrical componen that implements electrical resistance as a circuit element. The current through a resistor is in direct proportionto the voltage across the resistor's terminals. Thus, the ratio of the voltage applied across a resistor's terminals to the intensity of current through the circuit is called resistance. This relation is represented by Ohm´s law.
WIRE
It´s use to carry the electricity through the circuit.
CROCODILE CLAMP
It´s a simple mechanical device for creating a temporary electrical connector.
POWER SUPPLY
MULTIMETER
A multimeter is an electronic measuring instrument that combines several measurement functions in one unit.
A power supply is a device that supplies electrical energy to one or more electric loads.
Once we now this terms we are ready to prepare and analyze an electric circuit.
No hay comentarios:
Publicar un comentario